I'm trying to send a titanium bar for Hader attachements on 4 MUA RP implants. In order to bar has MUA interface integrated, should I include MUA ti-base merged in STL file? Also Is Keyhole profile in the exocad a correct type for Hader attachement? Thank you!

Hi Richard, 

You will not need to merge the Ti-Bases on to the bar. 
Please call us to speak to one of our Bar Milling Specialists at 844-ZIRCONIA (844-947-2664)

Thank you

what is the difference between standard and high definition finishing

Please Scroll down to the Description area, and you will see a sliding simulator.

For the Alien 8-Ultimate full arch restoration, can I send an STL of our design for you to mill?

No it will need to be designed by Alien milling. 
If you would like to order the sub and supra structure structure, you may do so individually. 
You will need to order the implant bar, and implant crowns. 

i need a thimble bridge, but need to send you the denture and model...can this be accepted

Yes that will be the Alien 8 - Ultimate Full Arch Restoration 

do you mill bars with angulated screw channels?

As of 12/10/21 we do not mill bars with angulated screw channels. 
Please subscribe to our newsletter, to see when it becomes available. 
Thank you

do you send screws with the ti bar or no? Looking to send MUA and SRA bars

We do not include the screws with Titanium Bars.

Can this be annodized?

Your wish is our command. 
Please see the new updated prescription.

Hello I want to submit an ExoCad files. What files do you all need to accept this case?

We just need the STL File.

Hi, I dont have a scanner so where can I send models for you to design and mill titanium bar? Please send info and lab scripts to my email

Hi There, 

We offer design serivces for bars from your model work.
Please see our address at the bottom of any page.

Price for 4 implant titanium bar?

The price does not change, regardless of the number of implant interfaces.

Where this place in the 🇺🇸

We are located at 
614 S. Glendora Ave.
Glendora CA 91740

What kind of designs can you mill? I understand you can only mill to multi unit interface. But can you mill a bar designed for hader clips? What about for locator? other retentive elements you can mill for.

Hi There, 

We can Mill your bar with MUA interfaces designed. 
You can design it with a Hader bar attachement but we do not provide the attachment. We will mill witht he cylinder. 
As of 1/29/2020 we do not mill threaded bars for locators. 

Thank you

are these prices for bars per implant? or flat rate for the milled design

Flat Rate

Can you mill bars from .stl file that I designed? I use the tru abutment scan bodies and design the bar with exocad. Can I send the construction file and the .stl file for you to mill?

Yes we can. 
The contruction file will help us. 
Please send that too. 

You can zip both files into one archive, and upload that.

Can you mill any kind of attachments like a locator attachment or the screw in part so you can add loctors to the bar yourself?

No it needs to have a Multi-Unit abutments base

how long does it take?

We need 3-5 days to mill Titanium Bars

units mean per arch or does it mean per implant site?

Unit means per arch

do the bars require multi unit Ti bases to be cemented in

No the Implant Bars engage directly on the Multi-Unit Abutments

Do the bars support tap holes for locators and is the cost per implant or is it a $399 flat fee per bar?

If your design includes tap holes, we can mill it. 
The cost of flat fee per bar, regardless of the number of implants. 

if a connector bar case has 4 screws would I be charged for 3 connector bars in-between the 4 screws?

No you will be charged for 1 bar regardless of the number of implants it is supported on.

can you place locator attachments on the titanium bar?

No we only mill bars with female MUA Interfaces at this time.

I need upper and lower titanium bar milled for snap on dentures over 3 implants. Need cost and turn around time. Do you accept Neodent and scan abutments which will give us stl files? Need more details? TY

Please give us a call at 844-947-2664
There are many variables, and our online prescription is the best way to price out a case. 
The turnaround times can be found here. 

The Scan bodies, need to be Dess Scan Bodies, for neodent. 

Thank you

Will you need a mounted case to fabricate a titanium bar for AO4 with wrap-around acrylic?

Yes we prefer a mounted case so we can design properly.

What type of bar should I select in the order for an AO6 with wrap around acrylic?

Hader bar will be good