Alien™ Dental Zirconia Block 98mm Disk PreShaded Blank – Alien Milling Technologies
Call 844-ZIRCONIA | Mon-Fri 8am-4:30pm PST
Cart 0
Alien™ 98mm High Translucency Zirconia Blocks
Ask a Question

Alien™

Alien™ 98mm High Translucency Zirconia Blocks

Lek 9,600.00

We don't just make it, we mill it everyday!

Get unmatched support when you buy Alien Zirconia Blocks from a team of professionals who use these blanks on a daily basis. 

Now you can mill Alien Zirconia in your lab. Experience the highest quality and translucency the Zirconia world has to offer. Over 100,000 satisfied patients, doctors, and labs. 

Available in...

White Zirconia 98mm Puck 

  • 98 mm x 12 mm 
  • 98 mm x 16 mm  
  • 98 mm x 20 mm 
  • 98 mm x 25 mm 
  • 98 mm x 30 mm 
  • 98 mm x 35 mm 

Pre-Shaded Zirconia 98mm Puck (A1-D4)

  • 98 mm x 12 mm 
  • 98 mm x 16 mm 
  • 98 mm x 20 mm 
  • 98 mm x 25 mm 
  • 98 mm x 30 mm 
  • 98 mm x 35 mm 

Compatibility

98mm with a 10mm step. Compatible with Weiland, VHF, Roland, and most open CAD CAM Milling Machines. 

Isostatic Pressing

Each Zirconia Blank is isostaically pressed for consistent results every time. We do not cut corners, as we use the exact same zirconia for our milling services. 

Gentle on your Mill

Alien Zirconia Disks are softer in the green state, than generic zirconia. This extends the life of your spindle, and tools. 

Translucency Factor

High Translucency has become a loosely used term to define the product, rather than the characteristics. The real definition lies in Translucency Parameters (TP), and Contrast Ratio (CR). The Contrast Ratio for Alien Zirconia Blanks are >34:1 CR %, one of the highest translucent zirconia offered in the industry. 

Research

We research, and use 98 mm Alien Zirconia Blanks in our milling center everyday. We know our zirconia is out of this world. Many labs, doctors, and patients may be unaware Zirconia is a radioactive material. Safety is the main focus of the company, and we would not use unsafe materials exposing our technicians to unsafe materials. 

Our Research and Development engineers continually test the zirconia powder for any traces of radioactivity, and makes sure the zirconia is 100% safe every time. 

Material Safety Data Sheet and IFU 

 

Sintering Schedule 

 For more programs, including programs for certain ovens, visit the sintering page

 


Up to 45 Units 

Total Run Time: 12-13 Hours

1-45 units
Step  Start Temp C End Temp C Rate Climb / min Time (mins)
1 0 900 10 90
2 900 900 0 10
3 900 1540 3 214.00
4 1540 1540 0 150
5 1540 0 0 Natural Cooling

 

Ivoclar Programat Oven

Step  t
T
H
1 10 900 10
2 3 1540 150
3 6 100
0

 

46 - 80 units 

Total Run Time: 16-17 Hours

46+ Units
Step  Start Temp C End Temp C Rate Climb / min Time (mins)
1 0 900 6 150
2 900 900 0 30
3 900 1540 3 214.00
4 1540 1540 0 270
5 1540 0 0 Natural Cooling



 

Warp Speed  5-15 units

(Fast Sintering) 
Up to 3 Unit bridges only


Total Run Time: 2-2.5 Hours

Fast Sintering
Step  Start Temp C End Temp C Rate Climb / min Time (mins)
1 0 1540 35 44
2 1540 1540 0 60
3 1540 300 45 28

 

**CAUTION - Please check with your sintering oven manufacture if the oven is capable. Fast Sintering cycles add stress on your oven, causing parts to wear and tear sooner. 


 

FAST! Full Arch Hybrid Sintering Program

(Beta)
Total Run Time: 16.5 hours 

Step  Start Temp C End Temp C Rate Climb / min Time (mins)
1 0 900 6 150
2 900 900 Hold 30
3 900 1540 3 214.00
4 1540 1540 Hold 270
5 1540 1300 6 40
6 1300 1300 Hold
30
7 1300 1200 4 25
8 1200 1200 Hold 30
9 1200 900
6 50
10 900
0
6 150

 


 

Full Arch Hybrid Sintering Program

Total Run Time: 23-25 hours 

Full Arch Hybrid Sintering Program
Step  Start Temp C End Temp C Rate Climb / min Time (mins)
1 0 900 6 150
2 900 900 Hold 30
3 900 1540 3 214.00
4 1540 1540 Hold 270
5 1540 1300 0
Natural Cooling 
6 1300 1300 Hold
120
7 1300 1200 0
Natural Cooling 
8 1200 1200 Hold 120
9 1200 1100 0 Natural Cooling
10 1100 1100 Hold 120
11 1100 1000 0 Natural Cooling 
12 1000 1000 Hold 120
13 1000 900 0 Natural Cooling 
14 900 900 Hold 60
15 900
0 0 Natural Cooling 


Ivoclar Programat Oven

Step  t
T
H
1 10 900 10
2 3 1540 270
3 3 1200
0
4 6 1000 0
5 8 100
0

Customer Reviews

4.7 Based on 22 Reviews
5 ★
86% 
19
4 ★
9% 
2
3 ★
0% 
0
2 ★
0% 
0
1 ★
5% 
1
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • quality
  • Delivery
  • price
  • zirconia
  • AK5+
  • color
  • Shades
  • zicrona products
  • customer service
  • questions
IO
Igor O.
United States
I recommend this product
06/01/2022

Thanks!

Excellent!!!!!!!!!!!!!!!!!

CW
Chris W.
United States United States
01/16/2022

Alien Extreme

This is a great product. Strong, beautiful, consistent in color.

CW
Chris W.
United States United States
I recommend this product
11/01/2021

Wonderful Experience

Excellent customer service! Amazing product.

LH
Lacy H.
United States United States
10/13/2021

Great!

Recently purchased an AK5+ and the entire experience was nothing less than great! Everything arrived quickly, safely and well packaged.

DR
Derek R.
United States United States
I recommend this product
09/12/2020

Great shade match

Delivery was fast and FREE Shades match great You can’t beat it


Share this Product


Other great brands

QUESTIONS & ANSWERS

Ask a Question
  • how many teeth can block zirconia made

    The Average is about 20 with Sum3D (Millbox). Each Cam software, drill diameter, and spacing can give different averages. 

  • I ordered a 98mm Alien HT puck, and am looking for sintering temps . Is there a sheet you can email me.

    Sintering Temps are now available on the product page. :)

  • We use DentalDirekt DDbio ZX2 liquids. Is this compatible with Alien HT zirconia

    Yes 

  • Good day. Are these compatible with Amann Girrbach?

    As long as your mill accepts 98mm Discs, it will be compatible.

  • WHAT EXACTLY IS A WHITE SHADE ZIRCONIA? IS IT LIKE B1 SHADE OR BLEACH BL1 OR BL2 SHADE?

    Pure as the driven snow 
    Absolute White, with no yellow hue.

  • How do you order to get the 1 free puck? thanks, Jeff

    Hi Jeff 

    Add at least 4 Zirconia Pucks to your cart, and the site will automatically discount the 4th. 

    The promo works in quantities of 4 so 
    Add 8 - 2 Free 
    Add 12 - 3 Free 
    so on. 

  • Is this zirconia compatible with origin dipping liquids?

    Yes it is

  • what is the strength in mpa of this zirconia?

    1,200 Mpa

  • Can I use this zirconia with an Amann Girbach Motion 2 mill? If so, what is the shrinkage value (or R value) I import when setting the blank.

    Yes you can. 
    The Shrinkage factor is etched on the side of each puck. 

  • I have sirona InLab MC X5, I purchased alien disc and I don't know what to put on x,y,z. I don't se the shrinkage anywhere in the disc info.

    Our Shrinkage factor is uniform across all axis since we use Isostatic presses. 
    the same shrinkage value should be applied on all axis (X,Y,Z)

  • Hi, I would like to know if this disc is compatible with Planmill50 Lab milling machines?

    Yes 
    Looks like the Plan Mill 50 is an Imes Icore 250i
    This mill works great with our zirconia.

  • Hello, my lab can still touch up the color on the pre-shaded ones, right? this is the first time I am buying a disc....

    Yes

  • What is your FDA clearance number for the pucks?

    Our FDA Registration number is 3013376795

  • Do I need to enter any x,y,z into data fields when entering new material puck for milling?

    No, you only need to enter the diameter of the puck 98mm, the height of the puck, and the shrinkage factor.

  • How many MPa are the HT Pucks?

    1,200 Mpa

  • Do you have an authorizate distrubor in balkan countrys.

    As of 05/14/2018 we do not have a distributor in that region. 

  • I have an Amann Girrbach Ceramill Motion 2 which accepts the pucks but I have to register a shrinkage or volume percentage but I don't see these values on the boxes the pucks come in. Where would I find this info?

    We have made a tool for Converting 98mm Dental Zirconia from Decimal to Percentages 

  • Hi wamt to know price 1 sample and price 100 pcs blocks of these bloc ks please let me to know

    Hi There, 

    The price for 1 is listed on the website. 
    Our current promotion offers Buy 3 Get 1 Free, No Limit. 
    If you add 100 to your cart, the promo will discount the 25 lessor values as Free, and you will only need to pay for 75.

  • What kind of pre sintering coloring I cause for alien extreme translucent white ?to go to different vita shades guide

    Any liquid that is water based. 
    Origin makes a great coloring liquid set that works great with our zirconia.

Liquid error (templates/product.ZrBlocks line 358): Could not find asset snippets/bold-loyalties-product.liquid